Monday, December 30, 2019

Judaism, Christianity And Islam - 995 Words

When death occurs in our family or in close friendships, the psychological consequences of the loss can be devastating. Feelings of emptiness, hopelessness or helplessness can have a major impact on our mental and physical health. Fortunately, throughout history, different cultures and religions have created ways for the mourners to cope with the tragedy of losing a loved one. In this paper, I will be comparing the advantages offered by religious traditions for the mourners, focusing on Judaism, Christianity and Islam. In addition, I will be contrasting them with the benefits offered by our modern secular funeral services. To start, Judaism’s priorities are on community and on law. Therefore, Jewish traditions regarding procedures after the death of an individual are very strict and extensive. First, the mourners are identified: children, parents, spouses and siblings. These family members are prohibited from participating in any funeral preparations and from continuing doing daily activities such as working, cooking or bathing. In fact, the only thing that the mourners are expected to do is to think about the deceased and to process their death, because they are thought to be too broken to function. This temporary stop of daily functioning and responsibilities can be very healing, as it gives them time to solely dedicate themselves to grieving. Furthermore, although mourners aren’t allowed to do anything, during the Shiva, their basic needs are covered by the community,Show MoreRelatedJudaism, Christianity, And Islam992 Words   |  4 PagesJudaism, Christianity and Islam are three of the most recognized monotheistic religions worldwide. These religions are often referred to as the Abrahamic religions because of their history to the founding father, Abraham. Judaism, Christianity and Islam are closely related with varying differences. Christianity was born from within the Jewish tradition, and Islam developed from both Christianity and Judaism. We take a look at some of the major similarities and major differences of these widely practicedRead MoreJudaism, Christianity, and Islam1538 Words   |  6 PagesJudaism, Christianity and Islam Christianity and Islam are the most influential religions in the world. Judaism has only fourteen million followers across the continents which makes Judaism the 12th largest religion. Although Judaism is not as large as Christianity and Islam, It still has an impact on the world. Prophet Abraham is the called in Islam the father of all prophets and because of that, sometimes Christianity, Islam and Judaism are called Abrahamic Religions. There are many known differencesRead MoreJudaism, Christianity, And Islam1052 Words   |  5 PagesAubrey Fletcher 3/9/15 Humanities Professor Michaud 417868 Judaism, Christianity, and Islam There are roughly 4,200 different religions in the world today, among them the largest are Judaism, Christianity, and Islam. These three religions are more similar then one would think. Christianity is the largest religion in the world with 2 billion followers and are called Christians. Islam is the second largest religion in the world with 1.3 billion followers. They are called Muslims, which means â€Å"oneRead MoreJudaism, Christianity, And Islam875 Words   |  4 Pageshave believed in a higher power or powers. Christianity, Islam and Judaism, the three most dominant religions are no different. They are all Monotheistic meaning they believe in one sole higher power or God. Though they share this common idea and many other similarity, they have many distinct features of their own that make them different as a whole. Many past religions have believed in the idea of multiple gods, Polytheism. Judaism, Christianity and Islam believe in one Supreme creator, MonotheismRead MoreChristianity, Islam, And Judaism1636 Words   |  7 PagesChristianity, Islam, and Judaism All three religions believe and worship the same God but they do it in different ways. Judaism happens to be the oldest religion today but they don’t have an official creed. They aim to teach you about God, the Messiah, human beings, and the universe which makes Jewish beliefs very important to them. But it is important to understand that being Jewish is more of a race and culture than it is a religion. Some Jewish people may have no interest in Judaism. Judaism hasRead MoreJudaism, Christianity, And Islam1679 Words   |  7 Pages Completely Different but Surprisingly Similar Judaism, Christianity, and Islam are all three different religions that many may not think can even be compared. At a glance, the religions are derived from different locations, the members of the religions look and act different, and some of the widely known practices are what make the religions so distinct. However, they are more similar than most people think. In the core of the three religions, many of their beliefs and practices show to be extremelyRead MoreChristianity, Islam, And Judaism Essay1967 Words   |  8 PagesChristianity, Islam, and Judaism represent the three most influential religions in the world throughout history. Judaism is, however, not as widespread as both Islam and Christianity, but it still has a profound impact in the world. Judaism, Islam, and Christianity are also known as the Abrahamic religions because their history is traced to the ancient individual, Abraham who is first referred to in the Hebrew Bible. There are many similarities as well as some differences between these religionsRead MoreJudaism, Christianity, And Islam902 Words   |  4 Pagesmost famous three religions -People of the book- are Judaism, Christianity, and Islam. Judaism is the oldest organized religion in the world; however, it only has 14 million followers around the world most of them centered in North America and Israel. Christianity, came after Judaism and have two billion believers around the world, and that’s about one third of the world population. Finally, Islam came after Judaism and Christianity. Even though Islam came afterwards, it spread quickly around the worldRead MoreJudaism, Christianity, And Islam1016 Words   |  5 Pagesthat keeps many people going in life but at the same time, the same reason our world has so many problems and has been torn apart. Through studying the main tenets in call, Judaism, Christianity and Islam were analyzed for weeks. Christianity and Islam take the cake for the two biggest religions in today’ s population however, Judaism plays the smallest role. These three religions, although different, are easily able to be compared and contrasted because of all of the history and information we have attainedRead MoreJudaism, Christianity, And Islam1087 Words   |  5 PagesJudaism, Christianity, and Islam are among the best known and most widely practiced religions today, and have had enormous cultural, ideological, and historical impact on the peoples of every continent. Arguably more so than any other ideological systems, Abrahamic religion has been among the most influential forces in human history. The shared elements of their traditions have allowed them to develop in part through a multi-faceted dialogue with each other. These faiths, despite sharing a common

Sunday, December 22, 2019

Evaluation Of Honey, I Warped The Kids - 975 Words

Evaluation of â€Å"Honey, I Warped the Kids† By Hung V. Tran Carl M. Cannon reasons in â€Å"Honey, I Warped the Kids† in the Utne Reader that violence on television must be suppressed due to its effects on human behavior. This evaluation will show that though the author makes some good use of statistical findings, he leaves many holes in his argument by not thoroughly discussing opposing opinions. Cannon systematically lists the studies and opinions of others who agree with him and does not discuss opposing positions. In content, first Cannon discusses the sociological interest in the subject of television violence and mentions that â€Å"the first congressional hearings took place in 1954† (95). He follows that with a list of studies that prove a†¦show more content†¦Ã¢â‚¬Å"For the past 22 years, says Cannon, they found, adults and children have been entertained by about sixteen violent acts, including two murders, in each evening s prime-time programming† (96). The statistics in the NBC study, which are touted by well-meaning critics, contradict themselves. The study claims on the one hand that violence desensitizes children; on the other, that it also incites more violence. In spite of this ambivalent evidence, Cannon s research is deliberate and narrow-minded in intention, using only what he needs to support his own point of view and ignoring the NBC evidence. In point of fact, it is arguable that images do not spill blood, but rather rage, desperation, and revenge, especially when they are equipped with guns. According to Todd Gitlin, there were 36,000 murders, accidents, and suicides committed by gunshots in the United States in 1992 alone (93). Honey, I Warped the Kids† seems at first to be a reasonable article. While one reads this article one may be convinced, thinking that statistics alone can decide the fate of their children. However, if an opposing viewpoint had been better represented, the casual reader may not have come to the same conclusion as C annon. Someone who disagrees with the article â€Å"Honey, I Warped the Kids may find Cannon s position quite troubling. Gitlin says, It’s dark out there in the

Saturday, December 14, 2019

Coffee Bean Free Essays

Currently, the price of coffee in the market is very high, but farmers receive less money than what they do. Furthermore, when world coffee prices rise, the price that customers pay in the shops usually goes up too. Yet, when world coffee prices fall, the price in the shops doesn’t come down. We will write a custom essay sample on Coffee Bean or any similar topic only for you Order Now According to www. newint. org, coffee is a multi-million dollar industry, but the profits don’t go to the farmers who actually work so hard to grow the coffee beans, and carry all the risks of failing crops or falling prices. Most of the profits go to the shippers, roasters and retailers. For example, while a cup of coffee costs $4-5, farmers get only 10% of that cost. To sum up, this is unfair with farmers who should receive more money for their coffee products. Besides the price of coffee beans is low, speculators also make the price pressure with the farmers’ productions. For example, after harvesting the coffee beans, farmers immediately have to sell their products to collect the capital and prepare for next season. That is the reason why farmers don’t have good price. In order to get price stability, Fair Trade has emerged to help farmers with their products. According to www. fairtrade. net, Fair Trade coffee producers are small family farms organized in cooperatives or associations which the farmers own and govern democratically. So, after joining Fair Trade, the price of coffee beans will be stable when farmers have harvested it. To sum up, farmers are not only more money but also depend on price. However, there are lower quality coffee beans which are sold at a price equal to the price of good quality coffee through fair trade. If farmers joined in Fair Trade, all their products which are good or bad also sold the same price that is not fair. According to www. ssireview. org, Fair Trade-certified coffee is growing in consumer familiarity and sales, but strict certification requirements are resulting in uneven economic advantages for coffee growers and lower quality coffee for consumers. Farmers are selling a different thing than they are producing. For instance, 1 bag of good quality coffee is sold at higher price than 1 bag of lower quality coffee in the market. If farmers joined in Fair Trade, those two bags would sell the same price. To sum up, farmers should not receive more money with their lower products. Besides, to be able to earn more money, while the price of coffee beans in the market isn’t high, farmers need to have more products which sell to raise their income. That reason why the government should support about the capital and lower interest rates those farmers can produce more productions. In addition, the government should invest for research new varieties with higher yields. For instance, the government will lend to farmers to buy materials, after the harvest, farmers would pay back for the government. All in all, if there are more yields and productions, farmers would earn more money without lower price. How to cite Coffee Bean, Essay examples

Friday, December 6, 2019

Literature Review Strategic Information System

Question: Discuss about the Literature Reviewfor Strategic Information System. Answer: Literature Review: The notable entities which have been illustrated in this report include the evaluation of an organizational structure and the related operational disadvantages. Description of the method for system acquisition for the organization could be noted as a prominent highlight of the report. The assignment also reflects on the process of developing and adoption of packages of accounting software (Ali Haslinda, 2014). Specific discussion on the market for Tricor Australia that has been selected for the report by referring to its capabilities as a known accounting enterprise in Australia reflects on the implications for market adaptability by implementing information systems (Boonstra, 2013). The experience of Tricor has enabled it to acquire progressive growth in a minimal span of time thereby implying plausible inferences towards its capability to address a diverse assortment of business requirements placed by clients. The emphasis of the organization on addressing innovative as well as entrepreneurial business needs has also been noticed as promising indicator of the organizations drive and passion for accomplishing competitive advantage. Tricor Australia has depicted cognizable improvement in the market of technical and commercial accounting services and has acquired the reputation of a potential player in the industry. Requirement of financial consultancy services by CFOs of prominent organizations as well as SMEs is also identified as a rationale for the companys consistent development. The capabilities of Tricor in provision of professional accounting services has led to the formation of a reliable network of professionals in the domain of finance throughout Australia as well as other prominent locations around the world such as Malaysia, Indonesia, United Kingdom and Japan (Dance, 2016). The cross border operations of the organization are not limited to these countries alone and the strategic expansion initiatives have led to promising fulfilment of organizational needs as well as client requirement in every area served by Tricor Australia. The innovative measures of the organization have successfully induced favourable outcomes such as improvement of net worth of the company alongside improving the returns for clients of the organization (Dance, 2016). Flat organizational structure can be assumed as the organization structure that can be observed in case of Tricor Australia. The organizational structure is characterized by the elimination of majority of roles and responsibilities of the middle management thereby leading to exclusion of a large share of functions of middle management. The elimination of notable functions of the middle management reflect on the reduction of gap between the top management and the ground level staff such as employees in the sales department, customers and staff working on the frontline (Farantos Koutsoukis, 2016). One of the profound advantages that can be obtained from the flat organizational structure refers to the breadth of the structure that facilitates noticeable reduction in response time of the organization. Response time could be defined from the perspective of variable customer preferences and conditions in the external environment (Haron, Sabri Zolkarnain, 2013, November). The distinct domains of the accounting software package for Tricor Australia could therefore be associated with the single flat organizational structure with negligible indications of support for a hierarchical organizational structure. The foremost entity supported by the domains of accounting software package of Tricor is the promotion of Group Policy development through integration of GPO in the computer units and users in context of the company (Hoque, Hossin Khan, 2016). The implications of Group Policy suggest that it is invulnerable to the organizational structure alongside indicating that users could not perform activities such as WMI filtering and creation of custom GPOs. The organizational structure of Tricor can be utilized for assignment of policies within the group and ensure feasible resource management owing to the observation of a logical nature. The observed flat organizational structure in case of Tricor Australia is capable of facilitating plausible advantages albeit with the concerns for specific issues and setbacks that can be observed in the operational aspects of the organization (Hovelja Vasilecas, 2013). The management is always at the risk of losing control over operations in a flat organizational structure and in case of Tricor Australia, the massive scale of the flat organizational structure could be reflective of concerns for threat to the operational systems due to disparities in distribution of managers and employees (Josiah, 2013). The management of the organization has to face considerable difficulties in terms of control due to lack of human capital for checking unrequited behaviour as well as support staff for following up on the decisions implemented by the senior management of Tricor. These implications could lead to formidable setbacks for the working relationships among individuals in a group leading to setbacks for management of human resources (Josiah, 2013). The management can face consider notable setbacks in context of personal interactions with employees. The implications of the development of personal interactions of the management with employees can be observed in the maintenance of trust alongside ensuring accountability and responsibility among employees for their work as well as for maintaining their professional commitments to the organization (Kummer Schmiedel, 2016). The management also faces noticeable limitations in the form of reduction in employee morale, authority issues, power struggles and ambiguities among employees pertaining to organization management. Employee retention can be a profound issue that can be observed in case of the flat organizational structure noticed in Tricor Australia. The performance of employees in the organization has to be dependent on the precedents of searching consistently for cognizable improvements in the company profile apart from the improvement in their salaries are reflective of profound concerns for realizing job satisfaction (Lee, et al., 2015). Employees could face considerable inclinations towards acquiring job positions in other companies where they perceive higher recognition of their personal efforts and contributions to development of the organizational profile with the references to increment in pay raise as well as promotions assigned to them. Flat organizational structure is accountable for potential setbacks for organizational growth and the crucial nature of change alongside the associated apprehensions can be major pitfalls for the company. The management of Tricor Australia can consider refraining from creative opportunities by inducing efforts for maintenance of organizational structure leading to reduction of prospects for the long term growth of the organization (Luse, et al., 2013). The flat organizational structure is also accountable for proliferation of unhealthy competition among employees thereby causing reduction in motivation of employees and increasing the confusion among employees. The reasonable system acquisition method for Tricor Australia would be a custom developed software since the processing requirements in the organization are specific for the organization thereby requiring own application software. The custom development of the application software can be ensured through the programmers available with the company who can coordinate with the analysts in order to establish internal information technology framework that can support the development of software on custom basis (Rajendran, 2015). The organization could implement the services of a computer agency or software development organization for accomplishing this objective which seems irrational owing to the large magnitude of the organization and the availability of a full-time development team. The final outcome of the development process is custom developed software that addresses the variable processing requirements of company and therefore suits the specific requirements of Tricor. The notable benefits that can be obtained from the custom developed software system acquisition method refer to fulfilment of the organizational requirements precisely and since costs of the system acquisition method would not bother Tricor due to global scale of operations, the system acquisition method provides viable implications towards cost effective solution for accounting information management. The flowchart for an organizations sales procedure (as shown in Appendix I) can be considered as a major requirement for the selling of products of Tricor Australia. Sale can be defined as the institution of a relationship between customer and vendor alongside promoting the completion of the prospective stage (Rasiah, 2014). The providers of services and goods by utilizing the channel of salespersons the objective is accomplished by the completion of sales as a response to request, appropriation and acquisition initiatives for the organization (Ren, et al., 2015). The communication of product title and the relevance of the product price with the application features and the obligations that can be derived on behalf of seller for passing ownership. The threats or setbacks that have been recognized in the organizations systems are profoundly reflective of the threats to the data security of Tricor Australia. The threats posed by hacking and the varying insufficiencies in the hardware and information systems framework could lead to detrimental consequences such as theft of confidential data related to the organization and the information pertaining to employees. These implications could account for cognizable setbacks in the custom developed software system implemented by the organization. The development of accounting system package and integrating them in the organizational framework are considered as imperative requirements for leveraging the advantages of accounting information systems for Tricor Australia. The necessity of technical support is crucial for the organization to capitalize on the prominent advantages of the accounting information systems which can be observed in the support facilitated by the Internet across varying telecom installations. The internet has become a common substrate for varying information networks and hence it indicates profound requirement for adoption in context of implementation of accounting software packages (Wali, Sadq Rasheed, 2016). Human resource management functions also require promising developments in the diverse sectors of training, computer centres, technical skills and accounting and should be facilitated to the staff at all times (Rajendran, 2015). The prominent insufficiencies in the domain of design, utilization and development of IT and accounting information systems could be derived from the lack of a functional accounting software package. Human resource can be considered as the primary entity which could dictate the operational efficiency of the computerized custom accounting software package. Therefore the software package presents promising implications towards the requirement of workforce involvement in the management of the software. Tricor Australia has noticeable competences in terms of technology based innovation that leads to adoption of computerized accounting system. The adoption of computerized accounting software reflects on the increment in organizational efficiency through reduction in delivery time and pricing for products and services alongside inducing operational development initiatives. The distribution of accounting software packages in diverse markets has depicted considerable change over the period of last 10 years indicating drastic modifications from country to country (Kummer Schmiedel, 2016). Existing market size for the accounting software packages reserves approximately 65% of total market share. However, the significance of market share in determining efficiency of accounting software packages can be undermined on the grounds of subjective nature of market share. The tax and audit services provided by the accounting software package can be considered as credible source of revenue owing to the independence of their demand from economic conditions. Accounting software packages are noticed for providing advisory services through incorporation of innovative technology such as data analytics and cloud computing services. Presently the Australian accounting software industry is dominated by names such as Xero, Intuit and MyOB leading to prominent levels of competition. The requirements for monitoring accounts and maintaining them flexibly could be imperatively observed in the case of every organization and hence the need for clipping off the conventional accounting frameworks and physical maintenance of accounting records became prominent. Therefore accounting software packages became highly popular in the Australian market in order to fulfil the above mentioned requirements. Adoption of accounting software packages is largely associated with the objectives for reducing tiresome paperwork that can lead to concerns for omission and commission as well as intensive use of time and financial resources. One of the profound challenges faced by companies in case of adoption refers to the lack of autonomy among various business units which leads to pressure on the accounting department for reviewing the accounting reports of other departments alongside removing any superfluous additions, inappropriate formats and duplication . The control of data security could be facilitated by the approach for information centric security alongside protection of cloud data leading to acquisition of competitive advantage for Tricor (Farantos Koutsoukis, 2016). Presently, customers of accounting software packages depict profound gaps and challenges such as weak reporting framework, outdated modules, and security threats, lack of features and accuracy, higher costs, lack of efficiency, access of foreign parties to the software. The accessibility of data is also a profound concern of system users since input of data is easily possible whereas extracting data could not be as flexible which invites concerns from application developers to make the software accessible and friendly for end users of the software (Kummer Schmiedel, 2016). Conclusion: The report presented a comprehensive literature review pertaining to the application of accounting software packages in context of a selected company, Tricor Australia. The report emphasized on limitations placed by organizational structure and the concerns of varying scales of operations of companies. Other noticeable highlights of the review are directed towards the concerns for data security in the information systems alongside accessibility of data for end users. References Ali, R. M., Haslinda, R. (2014).The impact of culture on strategic information systems planning: a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Business Information Systems at Massey University, Manawatu, New Zealand(Doctoral dissertation, Massey University). Boonstra, A. (2013). How do top managers support strategic information system projects and why do they sometimes withhold this support?.International Journal of Project Management,31(4), 498-512. Dance, S. G. (2016).InfoPreneurs: the hidden people who drive strategic information systems. Springer. Farantos, G. I., Koutsoukis, N. S. (2016). Strategic Information Systems Planning Of Public Sector In Economic Crisis: An Integrated Framework.European Scientific Journal, ESJ,12(19). Haron, H., Sabri, S. M., Zolkarnain, Z. N. (2013, November). A situational analysis of Strategic Information System Planning in the context of a Malaysian SME. InResearch and Innovation in Information Systems (ICRIIS), 2013 International Conference on(pp. 539-543). IEEE. Hoque, M. R., Hossin, M. E., Khan, W. (2016). Strategic Information Systems Planning (SISP) Practices In Health Care Sectors Of Bangladesh.European Scientific Journal,12(6). Hovelja, T., Vasilecas, O. (2013). A model of influences of environmental stakeholders on strategic information systems planning success in an enterprise.Technological and Economic Development of Economy,19(3), 465-488. Josiah, A. (2013). Business leverages on strategic information systems in Nigeria.International Journal of Learning and Development,3(1), 212-220. Kandjani, H., Mohtarami, A., Taghva, M. R., Andargoli, A. E. (2014). Classification and comparison of strategic information systems planning methodologies: a conceptual framework.International Journal of Enterprise Information Systems (IJEIS),10(1), 1-10. Kummer, T. F., Schmiedel, T. (2016). Reviewing the role of culture in strategic information systems research: a call for prescriptive theorizing on culture management.Communications of the Association for Information Systems,38(1), 5. Lee, T., Ghapanchi, A. H., Talaei-Khoei, A., Ray, P. (2015). Strategic Information System Planning in Healthcare Organizations.Journal of Organizational and End User Computing (JOEUC),27(2), 1-31. Luse, A., Mennecke, B., Townsend, A., Demarie, S. (2013). Strategic information systems security: definition and theoretical model. Rajendran, R. (2015). Influence of Information Systems Strategic Orientation on SMEs' Perception of Export Barriers [dagger].South Asian Journal of Management,22(2), 119. Rasiah, R. (2014). Book Review: Social Sciences and Knowledge in a Globalising World, edited by Zawawi Ibrahim, Petaling Jaya: Malaysian Social Science Association and Strategic Information and Research Centre, 2012, 499 pp.Institutions and Economies (formerly known as International Journal of Institutions and Economies),6(2), 137-140. Ren, G., Huang, Z., Lu, L., Hua, J., Wang, J. (2015). Method of generating strategic guidance information for driving evacuation flows to approach safety-based system optimal dynamic flows: Case study of a large stadium.Journal of Systems Science and Complexity,28(3), 606-622. Wali, A. I., Sadq, Z. M., Rasheed, J. S. (2016). The Role of Strategic Information System Characteristics on Customer Service Quality (An Empirical Study at Soran and Sardam Private Hospitals in Iraqi Kurdistan Region Erbil City).International Journal of Humanities and Cultural Studies (IJHCS)? ISSN 2356-5926,3(2), 1778-1790.

Thursday, November 28, 2019

3 Reasons You Should Get an On-Campus Job

College students can be some of the biggest pocket spenders in the country. From getting their daily caffeine fix to socializing off-campus with friends, getting extra spending money doesnt come easy. One way to do it is to find a part-time job as a student, whether thats on or off-campus. Here are a few reasons were proponents of on-campus work to help pay for your educational expenses.A Stones Throw Away Most students live on campus nowadays, so finding a job that is walking distance from campus can be hard. Commuter students can experience terrible scheduling when it comes to jobs in various industries (like retail, restaurant, and more). Luckily, most schools provide on-campus job opportunities, and will allow you to easily schedule work into your class schedule. Its not uncommon to hear students complain about how they are either late to work or late to class every week because their off campus job doesn’t allow them to create their schedule around their class schedule. You also don’t need to worry about getting into your car, or hopping onto a bus or train to get work. All you have to do is to stroll out of class, and within minutes, youre at work. Making Money Getting a job will also do the obvious - give you the opportunity to earn money. And lets be honest, every college student can use a bit of extra cash. That way, you wont have to worry about constantly asking your parents for gas money, or a few extra bucks to hang out with friends. On top of that, getting an in campus job shows to your parents that you are becoming more dependent. Instead of nagging them to help out, youre earning it on your own. Professional Experience On campus jobs will also help you be more prepared for the professional world. College is supposed to help students get their dream jobs and that is why student jobs are created. With student jobs, students can learn office behavior and office attire. Student jobs are more lenient than non-student jobs, allowing students to make mistakes and recover from them easily. At least when a student makes a mistake at an on-campus job, that student won’t make the same mistake at a professional job.And then, of course, there is the experience. Students can get the experience of multi-tasking, communication and more. With these experiences, students are more likely to get a job right out of college than those who do not have a job at all. So consider taking a on campus job at a newspaper, or the student government office instead of at Applebee’s. Although the pay rate may be less, the experience there will last you a lifetime.Already a college student? Make sure to sign up now to earn money by uploading your college application materials, and automatically be entered to win the scholarship! If you’re applying to college, check out the various profile packages of admitted students, or search by school to find your dream school.

Monday, November 25, 2019

Battle of the Bulge essays

Battle of the Bulge essays In September of 1944 all signs pointed to a resounding Allied victory and the end of WWII. Everyone believed this was the case except for one man, Adolph Hitler. Refusing to resign Germany to defeat, he began planning a massive counterattack as early as August of 1944. The stalemate along the western front combined with the Allied logistical problems provided him with the preparation time and the precise location to execute this attack, the Ardennes. Hitler had earlier ordered the formation of a new reserve to be used in a November offensive and once the location for the attack was decided a massive buildup of German troops began. Hitler believed the dense forests and bad winter weather, which grounded the Allied air forces, could conceal this buildup. Hitlers master plan was code-named Wacht Am Rhein or Watch on the Rhine and would be useless without the personnel and equipment to execute it. In the fall of 1944 the German army was stretched all over Europe and was showing the strain of 5 years of war. On the western front the Germans were outnumbered 2-1 in troops, 15-1 in aircraft, and 20-1 in tanks causing Hitler to adapt some drastic measures to overcome these odds (Dworschak 3). Some examples of these measures were although the Germans lost almost 27,000 machine guns in September, only 1,500 replacements were sent to the front while 24,000 were set aside for Wacht am Rhein (Dworschak 3). 1,900 mortars were assigned to newly organized units rather than to the front and not one new Tiger or Panther tank went to Russia (Dworschak 5). More than 70 percent of all newly produced tanks and assault guns were sent to the west. Lowering the draft age to 16 and raising it to 60-increased troop size (Dworschak 5). The German rail system used over 2,000 trains, traveling under the cover of darkness, to move 145,000 tons of supplies, 4.6 million gallons of fuel, and 66 divisions to the Ardennes pri...

Thursday, November 21, 2019

Analyse how the narrators perspective shapes (or mis-shapes) our Essay - 1

Analyse how the narrators perspective shapes (or mis-shapes) our perceptions in two novels from this course - Essay Example According to the (Hardie & Lucas 2001), economics affects the relationships of young and financial instability and differences lead to separations and divorces. These financial differences exert stresses on the couples leading to increase in conflicts and disagreements between them. These economic issues increase the regular level of violence between the couple. Mr Bennet was a person with strong personality and intelligence but his wife who was a daughter of lawyer was totally opposite. She was not patient and was an obsessed personality. Other than that she had negative traits of being pushy and forceful all the time. While on the other hand she was so desperate for the weddings of her daughter that she used to use embarrassing ways for her family to develop an interaction between her daughters and rich men. Mr Bennet was on the other hand a totally patient person with a calm personality so with time he surrendered himself to his wife but with the passing time became unsatisfied with his marriage. Now linking to the argument which was drawn earlier that middle class people believe when a couple is pushed in to marriage they automatically get involved while living together. But the cases presented in the novel portrays opposite. Irritating and all time forceful pushy behaviours lead to dissatisfactions amongst people making them unhappy ab out their marriages (Bautz & Tredell 2009). The argument was drawn in the first paragraph that middle class females believe that forceful marriages are fruitful too in the end but the actual reality is different. They are not fruitful and people stay dissatisfied from their relations. Linking it to the story of Jane and Bingley the initial attractions between them were the results of Mrs Bennet’s pushy behaviour. But Bingley proposed Jane as a result of their personal communications (Clark 1994). The insights of cultural and class differences are presented through the relationship of Elizabeth

Wednesday, November 20, 2019

The Main Character-Cum-Hero in the Platoon Film Assignment

The Main Character-Cum-Hero in the Platoon Film - Assignment Example The Platoon film by Oliver Stone is a 1986 production. It is an American war film featuring Chris Taylor who is a young American college dropout going to fight in Vietnam. On his arrival to Vietnam, he finds his presence as insignificant in comparison to the other soldiers who are much experienced in battle than him. He has his own team that soon finds itself fighting both the enemy in Vietnam and the men in his own platoon. The Unforgiven film begins by introducing the cause of the conflict that the movie bases it happenings on. There are words crawling across the screen, describing the life of a woman who got married to a murderer. One of the cowboys, Davey Bunting, is in one of the rooms at the brothels with a prostitute, Alice when from another room arises some commotion. It is in Delilah’s room (another prostitute), who was with Mike, a cowboy. Mike and Delilah are fighting, with Delilah throwing things at Mike as he advances towards her with a knife that he uses to cut u p her face. The Platoon film similarly introduces its subject basis right from the start. The main character, Chris, arrives in Vietnam and is at the introduction to the generals controlling the war. As this is happening, Chris catches a glimpse of rows of soldiers’ bodies awaiting shipment back to the United States. He also sees weary soldiers who have finished their terms in Vietnam awaiting transportation back home. He later learns that the ‘older’ soldiers do not associate well with the newcomers. Chris regrets volunteering.

Monday, November 18, 2019

The process of blacks in the Diaspora (Gambia) Religious Culture Research Paper

The process of blacks in the Diaspora (Gambia) Religious Culture - Research Paper Example Ghana sported thirty six out of the total forty two slave fortresses. In addition to Ghana, another eight African locations were utilised for shipping slaves. These included Sierra Leone, Liberia, Ivory Coast, Bight of Benin, Bight of Biafra, Gold Coast, South East Africa, Central Africa and Senegambia. (Brown, 2000) The brunt of the slave trade was mostly borne by central and west Africa. West Africa alone contributed around three fifths of the total slave populations supplied. It is estimated that one half of slaves were exported to South America while 42% went to the Caribbean, 7% to North America and 2% went to Central America. The subsequent influence of these exported slaves was instrumental for culture in these regions. The focus of this text is to trace the religious influences of African slaves from the Senegambia region. African Americans were faced with two challenges. On the one hand they were trying to establish an independent identity and on the other hand they were cre ating various religious traditions. These religious traditions can be approximated in three articulate movements. The first stream represented results of the initial African contact with Christianity from Europe. The emerging religion was more African in character both liturgically and theologically. The second stream represented an extension of the first stream whereby religious practices developed in Africa migrated to the Americas. Though these beliefs and practices were modified in the Americas but the predominant influence remained African which aided in this stream being distinct. The third and final stream saw the amalgamation of borrowed ideals and concepts from Islam, Christianity and Judaism. These faiths and their concepts were woven as a novel fabric with visions of Africa as a historical power and in some instances as a future destination. These streams are discussed below to promote an understanding of religious influences under Diaspora. The first stream represented C hristian influences permeating into Africans often in direct proportion to the social class in question. The higher classes had lowest African influence and greatest Christian influence and vice versa. Traditional practices of hoodoo and voodoo as well as other derivatives of primitive West and West Central African religions crept into the newly adopted Christian faith. This was all the more apparent in the American South. Religious services saw the use of songs and dancing as well as the possession by the Holy Ghost during these services. Similarly the Caribbean witnessed Christianity imbued with overwhelming African content. This hybrid religion was connected with obeah, the use of supernatural powers to cause harms to others and to myalism, the use of herbs and spiritual resources in order to combat witchcraft and evil spells. Alternatively the religions of convince and kumina also took root. Convince involved respect for the Christian diety along with an active veneration of anc estors by spiritual healers known better as Bongo men. In a similar manner, kumina held ancestors in great veneration and ranked them after the sky gods and earthly deities. In contrast to the above, the second stream was more prominently experienced in Cuba and Brazil where reinvented African religion was the centre of religious attention. The various ethnic kinds of African slaves that were brought to Brazil maintained distinct identities by sticking to

Friday, November 15, 2019

Chemical compounds

Chemical compounds Introduction Chemical compounds can generally be classified into two broad groups: molecular compounds and ionic compounds. Molecular compounds involve atoms joined by covalent bonds and can be represented by a variety of formulas. Ionic compounds are composed of ions joined by ionic bonding, and their formulas are generally writtenusing oxidation states. Molecular Compounds Molecular compounds are composed of atoms that are held together by covalent bonds. These bonds are formed when electrons are shared between two atoms. The concept of chemical formulas was created to describe many characteristics of molecular compounds through in a simple manner. A normal chemical formula encompass factors about which elementsare in the molecule, and how many atoms of each element there are. The number of atoms of each element is denoted by a subscript, a small number that is written to the left of the element. In the preceding formula, the subscript â€Å"2† denotes the fact that there are 2 hydrogen atoms present in the molecule. Other types of formulas are used to display more detailed characteristics of molecules. An empirical formula represents the proportions of atoms in a molecule. It gives important information about a molecule, because itdisplays the ratios of atoms that are present within the molecule.However, itslimitations exist in the sense that it does not represent the exact number of those atoms that are present in the molecule, as do molecular formulas. In certain situations, the molecular and the empirical formula can be the same, but in other situations, the molecular formula is a multiple of the ratios of atoms indicated in the empirical formula.Since empirical formulas can be derived from molecular formulas,molecular formulas are generallymore useful than empirical formulas. To illustrate the difference between empirical and molecular compounds: C5H7O is a possible empirical formula, because a ratio of 5:7:1 cannot be simplified any further. In this particular case, the empirical formula could also be the molecular formula, if there are exactly 5 carbon atoms, 7 hydrogen atoms, and 1 oxygen atom per molecule. However, another possible molecular formula for this same molecule is C10H14O2, because while there are 10 carbon atoms, 14 hydrogen atoms, and 2 oxygen atoms present, theratio 10:14:2 can be simplified to 5:7:1, giving way to the same empirical formula. Additionally, C10H14O2is not the only possibility of a molecular formula for this molecule; anyformula with the same relative proportions of these atoms that can be simplified to a 5:7:1 ratiosis apossible molecular formula for this molecule. When given adequate information, the empirical formula and molecular formula can be quantitatively ascertained. A structural formula is written to denote the details of individual atoms bonding. More specifically, it clarifies what types of bonds exist, between which atoms these bonds exist, and the order of the atoms bonding within the molecule. Covalent bondsare denoted by lines.A singleline represents a single bond, twolinesrepresent a double bond, three lines represent a triple bond, and onwards. A single covalent bond occurs when two electrons are shared between atoms, a double occurs when four electrons are shared between two atoms, etc. In this sense, the higher the number of bonds, the stronger the bond between the two atoms. The above is a diagram of the structural formula of acetic acid, whose molecular formula is CH3COOH. A condensed structural formula isa less graphicalway ofrepresentating the same characteristics displayed by astructural formula. In this type of formula, the molecule is writtenas a molecular formula with the exception thatitindicates where the bonding occurs. The above diagram isthe structural formula of hexane. By referring to the structural formula and emphasizing where bonding occurs, one can ascertain a condensed structural formula of CH3CH2CH2CH2CH2CH3. All the representations discussed thus far have not addressed how to show a molecules three-dimensional structure. The two ways to illustrate a spatial structure are through the use of the ball-and-stick model as well as the space-filling model. The ball-and-stick model uses balls to spatiallyrepresent a molecule. The ballsare the atoms in a molecule and sticksare the bonds between specific atoms. The space-filling model is also a method of spatially displaying a molecule and its characteristics. A space-filling model shows atoms sizes relative sizes to one another. Ionic Compounds Ionic compounds arecomposed of positive and negative ions that are joined by ionic bonds.Ionic bonds are generally formed when electrons are transferred from one atom to another, causing individual atoms to become charged particles, or ions. Ionscan be referred as either monatomic or polyatomic. Monatomic ions such asCl−are composed of only one ion,while polyatomic ions such as NO3−are defined as polyatomic ions. A combination of these ions that forms a compound whose charge is equal to zero is known as a formula unit of an ionic compound. Formulas of ionic compounds can be written with reference to oxidation states. For further reference, please visit the ChemWiki article dedicated to oxidation states: Outside links Molecular compounds:http://en.wikipedia.org/wiki/Molecular_compound Ionic compounds:http://en.wikipedia.org/wiki/Ionic_compound Determining the empirical formula of a molecule:http://www.chem.tamu.edu/class/majors/tutorialnotefiles/empirical.htm Determining the molecular formula of a molecule:http://chemed.chem.purdue.edu/genchem/probsolv/stoichiometry/molecular2/mf2.0.html Using oxidation states to determine formulas of ionic compounds:http://www.fordhamprep.org/gcurran/sho/sho/lessons/lesson53.htm

Wednesday, November 13, 2019

The Pros and Cons of Technology :: Pro Con Essays

  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Many argue that as we venture further into the frontier of technology we proceed with a slow death of society, by losing culture and ultimately a sense of self. To a certain extent this may be true, but realistically if we cease to progress we wont be able to survive. (Robert) The advantages Technology has given us outweigh the disadvantages.  Ã‚  Ã‚  Ã‚   There are many examples of advantages and disadvantages some mentioned were â€Å" Technology has the ability to create shortcuts in working and can make tasks easier also. Solid examples are cars, calculators and phones, through technology life may be faster but is also easier. To further this point a fact brought up by Jo-ann was that diseases we have today would be and could have become epidemics, if it were not for technology being there in the field of medicine, medical advances would not have happened or would have come years later (Jo-ann). As far as transportation man has come a long way from horses and coal driven trains to computer navigable and driven cars. In boats crossing the Atlantic it took four to six months, in 747 airliner commercial jets takes ten to fifteen hours (Dana), even though they add to the pollution crisis a population accustomed to having these conveniences is still using them regardless. Among other advantages is the fact that with technology communic ations is a hundred times faster than without it (Ailua). Before telephones, emails and fax machines, there were trains, carriages and the pony express with the modes of traveling we have now we have been able to make the world smaller so to speak. With technology we enjoy luxuries such as movies, television, fresh food and refrigerators, ovens to cook on and bake in. And with every advantage that technology gives, it brings along with it a disadvantage we have come to depend on it more and more as we advance in the field. If we didn’t have technology we would become victim to things we were ignorant of. An example would be the bubonic plague in Europe in the sixteen hundreds , they did not have the medical advances that we have to deal with diseases like this to them it was a guessing game. As mentioned before we have technology to be able to find causes and cures. To me, the only real threat that technology poses to mankind is its abilities being used in nuclear and atomic warfare.

Monday, November 11, 2019

Barriers To Supply Chain Management

Becoming an integrated value partner requires tight integration between the supply chain and customer relationship activities. There are many visible and invisible barriers that check smooth supply chain management. To illustrate, a company that customizes its offerings to delight a customer with high potential lifetime value must also ensure that its supply chain management processes seamlessly feed into its CRM process for that customer.This forms the basis of an integrated demand and supply chain management system free from any kind of barriers.Research proves that companies that do integrate demand and supply chain management systems are more successful than their counterparts. Those that have successfully integrated their CRM and SCM activities tend to perform better than their competitors. Specifically, these companies gain a competitive advantage by (1) collaborating both internally and externally with supply chain partners, such as suppliers, distributors/retailers, and custo mers having no or less barriers, and (2) measuring and exceeding their goals for customer loyalty and retention for each customer and segment.They often are aided by new Internet technologies, which help them, improve supply chain collaboration and build relationships across a network of suppliers and customers. This, in turn, allows them to differentiate the way they create value for every customer and segment. With these emerging e-business technologies that can seamlessly link manufacturers, suppliers, distributors, and customers, companies, in theory, can swiftly orchestrate resources to respond to each customer's needs. But in reality, this is virtually impossible to do.Companies simply do not have the resources to simultaneously respond in real time, reduce manufacturing costs, keep zero inventories, and provide excellent service for each and every customer. So instead of trying to satisfy every customer perfectly, they need to learn how to dynamically balance customer value a nd supply chain costs to build the right customer relationships. Companies can achieve this balance by leveraging Internet technologies to create digitally integrated demand and supply systems in which there is no chance of any barrier.Such systems would provide real-time, differentiated responses to customers according to their loyalty, lifetime value, requirements, and servicing costs. By focusing on maximizing the entire value creation process, rather than on just specific CRM or SCM activities, companies will begin to reap the real benefits of the new digital economy. Heineken and Cisco Systems are examples of companies that are leveraging the Internet to enhance collaboration with customers, distributors, and suppliers and hence an effective tool to remove various barriers of supply chain management.Heineken has focused on CRM, while Cisco has emphasized SCM. Heineken has developed a Web-based system to share information with distributors on forecasts, marketing and promotions, and order fulfillment. The system has doubled Heineken's customer satisfaction ratings. Cisco, a leader in networking equipment for telecommunications and the Internet, has created electronic links with key suppliers across its entire product line to give it unprecedented supply chain flexibility. The links enable suppliers to ship more than 65 percent of Cisco's orders directly to the final customer without physical intervention from Cisco.The result is a significant reduction in the time it takes to ramp up production of new products. Although both of these companies are innovators, neither one has developed a truly integrated demand-supply chain that depends on simultaneous excellence in both SCM and CRM. Other leaders are leveraging the Web in different ways. Companies like Herman Miller and Dell Computer, for example, have discovered that excellence in products, service, and production alone is not enough to compete in the future.They recognize that they must become integrated value providers and they also leant that this is only possible by removing visible and invisible barriers from supply chain management. Herman Miller, a leading furniture manufacturer, is creating tailored Web pages that will not only streamline manufacturing, inventory, and order information flows to and from its 500-plus suppliers around the world but also sell to and service its most important customers. Leveraging the Internet in this way will help Herman Miller differentiate products, service, and delivery for customers according to the value they bring to the company.(Siems, 2005) Similarly, Dell continually resegments its customer base and measures the lifetime value of customers. The computer maker then manages its interaction with customers through tailored Web pages that offer each customer the most profitable customer service level. Dell also has an online supplier portal that handles 90 percent of purchases from the 33 most important suppliers. This feature helps Dell a nd its suppliers share key data and measurements on shipment accuracy, quality, and demand forecasts.As companies like Dell succeed in integrating customer and supply chain systems, they can further reduce inventories; improve customer responsiveness, decrease barriers and increase customer loyalty and shareholder value. Just by taking the early steps toward achieving excellence in CRM and SCM, companies can begin to boost their business performance while erecting formidable barriers to the competition. Competitors will find it increasingly difficult to mimic the value offered by these â€Å"integrated value providers.† (Shankar, 2004) Creating new value propositions is the second approach to integrating demand and supply. This entails modifying the demand-supply chain design to create a mutually beneficial supply chain system for both the company and the customer and it also helps in removing various barriers in the way of supply chain management. To do this, companies must change the point in the supply chain at which they allocate goods while simultaneously altering the point at which they fulfill demand.The idea that suppliers should work much more closely with customers to give them better value is not new as far as the removal of barriers is concerned. Yet close partnerships are still not common largely because, until recently, integrating the information systems of two or more companies was a lengthy, expensive, and technically difficult process. The recent widespread adoption of Web-based enterprise resource planning (ERP) systems and the rise of the Internet, however, have made it much easier and cheaper for customers and suppliers to integrate and exchange data.(Holmstrom, 2001) And yet, disconnects still occur. In reality, most of the changes that suppliers implement do not add much value from the customer's point of view and this also proves to be a barrier. A supplier, for example, might typically cut its inventory by reducing product varie ty–which is not very helpful for the customer or for the customer's customer. By tweaking the demand-supply chain, however, suppliers can design mutually beneficial supply chain systems for particular customers.These systems will offer customers completely new value propositions while improving the supplier's own operations. To affect a mutually beneficial supply chain design, companies must focus on the customer's demand chain, which transfers demand from the market to the supplier. A retailer's demand chain, for example, would consist of assortment planning, inventory management, and procurement. This demand chain joins with the supply chain to form the demand-supply chain. The chains link together in two places–the supply-fulfillment point (SFP) and the demand-offering point (DOP).Efficient Consumer Response (ECR) is an approach to avert barriers in supply chain management which originated in the US and gained support from major European retailers. It is a manageria l approach that starts with consumer demand and then gears the whole of the supply chain to responding to that demand. It is a customer-driven, demand-pull product management system: a seamless interface from consumer purchase to manufacturing schedules; it is different to a supply-push or buying-led approach, which is based on the principles of sales forecasting, with products supplied in preparation for estimated demand.References Holmstrom, J. , W. E. Hoover Jr. , P. Louhiluoto, and A. Vasara. â€Å"The Other End of the Supply Chain,† The McKinsey Quarterly, 2001, 1, 62-71. Shankar, V. â€Å"e-Marketplaces: Evolution and Future,† Working Paper, University of Maryland, 2004. Siems, Thomas F. 2005. â€Å"Supply Chain Management: The Science of Better, Faster, Cheaper. † Federal Reserve Bank of Dallas. Southwest Economy. Issue 2, March/April, pp. 1, 7-12.

Friday, November 8, 2019

Free Essays on Overcoming And Becoming ‘Improvement’

In Thus Spoke Zarathustra, Nietzsche uses the figure of Zarathustra to put forward his theory of how man can improve himself. Zarathustra teaches three metamorphosis of the spirit. The first is the camel, which is burdened by the established values of society. Next the spirit becomes the lion, which creates for itself the conditions necessary to create new values. The third metamorphosis is the child who, unencumbered by traditional values, is able to will its own will and follow its own path by creating new values. The child is the goal of development rather because only realized after the destruction of prescribed values are the conditions for creation the child is capable present. In Twighlight of the Idols Nietzsche discusses a different kind of â€Å"improvement.† Nietzsche identifies the ‘improvers’ of mankind as those who wish to tame and break his spirit. Zarathustra’s improvement requires a similar disposition as that employed by the Ã¢â‚¬Ë œimprovers’ Nietzsche describes. However, unlike the ‘improvers’ Nietzsche describes, Zarathustra teaches improvement where the individual is responsible for establishing his own values. Zarathustra requires the individual to create and recreate his own path rather than follow the will of another. Only by following one’s own path is one able to truly progress. The first metamorphosis of the spirit Zarathustra teaches is the camel. According to Zarathustra, the camel asks â€Å"What is the heaviest thing, you heroes? that I may take it upon me and rejoice in my strength† (Zarathustra, 54). Here Zarathustra identifies the camel as a beast of burden. The spirit in this stage believes that by carrying a burden it will display strength. The heaviest things the spirit is willing to carry are the tendencies to â€Å"debase yourself in order to injure your pride,† â€Å"to be sick and to send away comforters in order to tempt the tempter†, â€Å"to love those who despise us and to ... Free Essays on Overcoming And Becoming ‘Improvement’ Free Essays on Overcoming And Becoming ‘Improvement’ In Thus Spoke Zarathustra, Nietzsche uses the figure of Zarathustra to put forward his theory of how man can improve himself. Zarathustra teaches three metamorphosis of the spirit. The first is the camel, which is burdened by the established values of society. Next the spirit becomes the lion, which creates for itself the conditions necessary to create new values. The third metamorphosis is the child who, unencumbered by traditional values, is able to will its own will and follow its own path by creating new values. The child is the goal of development rather because only realized after the destruction of prescribed values are the conditions for creation the child is capable present. In Twighlight of the Idols Nietzsche discusses a different kind of â€Å"improvement.† Nietzsche identifies the ‘improvers’ of mankind as those who wish to tame and break his spirit. Zarathustra’s improvement requires a similar disposition as that employed by the Ã¢â‚¬Ë œimprovers’ Nietzsche describes. However, unlike the ‘improvers’ Nietzsche describes, Zarathustra teaches improvement where the individual is responsible for establishing his own values. Zarathustra requires the individual to create and recreate his own path rather than follow the will of another. Only by following one’s own path is one able to truly progress. The first metamorphosis of the spirit Zarathustra teaches is the camel. According to Zarathustra, the camel asks â€Å"What is the heaviest thing, you heroes? that I may take it upon me and rejoice in my strength† (Zarathustra, 54). Here Zarathustra identifies the camel as a beast of burden. The spirit in this stage believes that by carrying a burden it will display strength. The heaviest things the spirit is willing to carry are the tendencies to â€Å"debase yourself in order to injure your pride,† â€Å"to be sick and to send away comforters in order to tempt the tempter†, â€Å"to love those who despise us and to ...

Wednesday, November 6, 2019

Spinning Hobbies Into Cash

Spinning Hobbies Into Cash We are writers. However, we are not only writers. Our lives are filled with myriad interests and passions. You can use your wordcrafting to turn these into money. The well-known adage Write what you know holds true. Thousands of specialty periodicals exist. Many require freelance submissions to fill their pages with informative and entertaining articles. Brainstorm different avenues for articles based on your interests or hobbies. First, consider exam article ideas that focus directly on the hob Second, discuss specific techniques or skills associated with the hob Third, try the human interest angle. Interview a special person in the field, highlighting their knowledge and expertise. For example, when I moved to Texas, as a weaver and spinner, I brought boxes of fiber with me. A year later, when it all still sat in a shed, unused, I decided to pass the wool along to other spinners. I met Mea Stone, who raised goats and crafted with their fiber. Her story of how she began her hob Another example is my vintage quilt collection. I discovered an old set of 1934 friendship quilt squares in a yard sale, traced the names on the squares, and later delivered them to a museum in Iowa. This offered a wealth of publishing opportunities. These squares turned into a short children’s story, two Quilter’s World articles, and paid speaking engagements at the museum and a quilter’s guild. Do you garden? Do you have favorite plants? Try publications such as: The American Gardener (ahs.org/gardening-resources/gardening-publications/the-american-gardener/writers-guidelines) Horticulture (hortmag.com/submissions) Greenprints (greenprints.com/content/12-writer-guidelines) Do you collect antiques, baseball cards, or comic books? Try specialized publications such as: Antique Trader (antiquetrader.com/contactus/) Journal of Antiques (https://www.antiquesjournal.com/contact.html) Treasures Magazine (losttreasure.com/content/writers-guidelines) Do you spin, weave or dye? Handwoven (weavingtoday.com/media/p/6.aspx) Shuttle, Spindle Dyepot (weavespindye.org/media/wysiwyg/pdfs/WritersGuidelines2.1.08_1_.pdf ) Spin-Off (http://eimages.interweave.com/general/pdfs/Spin-Off-Contributor-Guidelines.pdf) Are animals your passion? Hundreds of magazines exist. Just a few are: Hob Mother Earth Living (motherearthliving.com/mother-earth-living-freelance-writer-guidelines.aspx#axzz3OYcifwia ) Cat Fancy (catchannel.com/magazines/catfancy/writers_guidelines.aspx) Bark (http://thebark.com/content/submission-guidelines) Horse Rider (http://horseandrider.com/contribute/submission-guidelines) Are you interested in health, exercise, yoga or meditation? Spirituality Health (http://spiritualityhealth.com/submission-guidelines) Eating Well (eatingwell.com/writers_guidelines) Yoga Journal (yogajournal.com/about_us/editorial_guidelines/). The possibilities are endless. Do you make jewelry? Travel? Own a therapy dog? How about radio controlled vehicles or model railroads? Are you a woodworker? Ghost hunter? Glass artist? Don’t rely on Writer’s Market as the only resource for consumer magazines. Their listing is only a small slice of the magazines available. Go to the book store and peruse their selections. Stop at local libraries and see what they carry. Check out feed stores, hob Each hob

Monday, November 4, 2019

Theology Term Paper Example | Topics and Well Written Essays - 2500 words

Theology - Term Paper Example It involves celebrating Gods revelation to humanity through Christ. The Second Advent is characterized by scriptural references with themes majorly inclined to being accountable during his second coming. Judgment of sin and hope of everlasting life is given preeminence in the Second Advent. Advent has deep-rooted focus in the past and the coming future. It is characterized by great symbolism that refers to spiritual journey of individuals and utmost the congregation. The congregation celebrating the advent should be encouraged to do so with hope, anticipation and a spirit of longingnes.They should yearn for deliverance from temptations and evils of the universe. The advent service should start by deliverance to resemble the Israelites who wept out to God to deliver them from bondage in Egypt. The cry of the faithful should rest in the fact that, there is still future hope for deliverance despite being part of a world full of sin and exploitation. The hope by the faithful fills them w ith anticipation that in the near future; a Just King will come whose rule will be marked by righteousness. Themes on anticipation that signifies a new dawn with the royalty of the anointed are to be included in the service. The introduction part of the advent service begins with a song. The song must be relevant to the season and introduce the theme. Songs related to the scriptural readings of the day should be encouraged. ... At this stage, reconciliation is encouraged among the Faithfulls, which signifies that the Christ who is to be born is a prince of peace, and he will bring peace on earth. In the liturgy of the scripture or the word as it is sometimes known, one or even more verses from the scripture are read. The reading can come from the book of psalms. Duration of silence would be observed accompanied by reading from the bible to allow the word to be well understood by the congregation. Preferably in the case of one reading, a verse from the gospels should be read. In liturgy of reconciliation, the minister opens a reconciliatory statement then the congregation joins in. The congregation confesses their sins and prays for those who have wronged them. Musical instruments and the tunes they play should match with the theme of the season. Musical instruments play a great role as they focus thoughts of the congregation on the main theme of the day. A prayer of thanks giving should conclude the Advent service. The prayer gives gratitude to God for His constant love and redemption. The priest concludes the service by blessing the congregation. Words of Gods constant love, care, and protection dominate the blessings. The priest then ends the service by releasing the gathering. He proclaims Gods peace on the congregation. In Barth’s shoes, the advent session service would be a period of fasting and repentance of sins. The service would derive its concept from that of Lent season. When fasting, the congregation is expected to anticipate for good things in future when Christ comes. This should happen even though the return of the Messiah in both Judaism and the Old Testament shows no connection with the aspect of remembering sins. On the contrary, it was marked by

Friday, November 1, 2019

Homo floresiensis or the Hobbit or Flores man, is it a homo erectus Research Paper

Homo floresiensis or the Hobbit or Flores man, is it a homo erectus - Research Paper Example These remains have increased historic researchers’ curiosity of intense research in order to determine if they represent a distinct species from modern humans. This scientific controversy progress has closely been followed by different forms of media. The most remarkable feature of this hominid is that it has a small brain and body. However, it could have survived until the recent past, about 12,000 years ago. Together with the skeletons were archeological horizon’s stone tools. Critics of this species claim that they are HomoSapiens going by their physiology and anatomy. The other hypothesis is that these individuals did have functional thyroids during their birth, and this resulted in myxoedematous, a kind of endemic cretinism. To prove the hypothesis wrong or right, researchers are in the process of finding preserved mitochondrial DNA, so that they can compare it with samples from the same specimens from fossilized HomoSapiens and Homo. The possibility of the similarity between Homo floresiensis and Homo sapiens is a study that needs further research. Though many scientists and scientific groups have shown mush interest on this subject, they still have not yet found the truth. However, the already found research findings indicate that this species is different from today’s human in several ways like body and brain size. Furthermore, its time of existence is also questionable. Mitochondrial DNA, which is still in the process of being undertaken, might be the only hope that will answer the many questions that scientists want to answer.

Thursday, October 31, 2019

Annotated Bibliography Essay Example | Topics and Well Written Essays - 250 words - 2

Annotated Bibliography - Essay Example This study focused on how team leanring in the context of nursing is impacted if two different methods of leanring were implemented. For this survey a total of 1111 nurses became the part of the population for the research. Through their literature review they exhibit that limited research has taken place on creativity and learning for nurisng teams. The reserachers figured out that various sorts of team leanring activities are taken up by nurisng teams in order to obtain and analyse differnet sorts of information in the context of nursing. There was little impact of the composition of a nursing team on their leanring activities (Holleman, 2009, p.1256). But major impact on team learning activities was made by various contextual factors. Activities of team learning that focused on how nursing care hsould be conducted positively impacted the implemnetation phase of innovative training methods. This research study can be used to explain what kind of trainings have proven to be benefici al for nursing teams. Holleman, G., Poot, E., Mintjes-de, G. J., & van, A. T. (September 01, 2009). The relevance of team characteristics and team directed strategies in the implementation of nursing innovations: A literature review. International Journal of Nursing Studies, 46, 9,

Monday, October 28, 2019

Mergers and Joint Ventures Essay Example for Free

Mergers and Joint Ventures Essay When a company is first born, the last thing on its owners mind is merging with another company. A merger is sometimes a voluntary and sometimes and involuntary transaction. If a company has found itself in a place of financial difficult or is simply exhausted all its resources to remain open, a merger may be the only way its employees can retain their position. The alternative would be to close its doors and give up. Below we will discuss the differences between horizontal, vertical, and conglomerate mergers and how these differ from a joint venture. Horizontal mergers occur between businesses within the same industry. Often between organizations that share the same space or sell similar competing goods or services. A horizontal merger is simply put two companies who consolidate to work as one to make the goods or services better or more profitably. A good example would be when Hewlett Packard and Compaq merged. Two rival competitors selling similar goods who merged together to continue making products as a team. According to the Minority Business Development Agency, â€Å"a vertical merger occurs when two or more firms, operating at different levels within an industrys supply chain, merge operations.† The idea behind a vertical merger is synergy. When two companies that are not necessarily selling the same type of product or products, but are in the same supply chain merge together to make a more efficient company is synergy. One example of a vertical merger would be if American Airlines merged with Boeing manufacturing company. This would cut out the middle man between American and Boeing, and give American more control of the process, versus having to go through a middle man. Conglomeration mergers are mergers between two companies that have nothing in common. Usually these two companies merge to diversify their holdings. An example of a conglomeration merger would be  like a company that makes ice cream merging with a company that owns grocery stores. Although the two companies are different, one can help the other and thus make a profit for both of the companies. The difference between a conglomeration merger and a joint venture is that a joint venture can be entered into by any two companies working separately from their original purpose on a joint project that will produce a profit for both companies. The companies agreeing to a joint venture do not necessarily have to change their original company structure or management. The original company may be a different entity entirely. Joint ventures enable companies to diversify. All of these mergers are example of companies that joined forces, and either one or both disregarded their individual identity. A joint venture in comparison is when a commercial enterprise is undertaken jointly by two or more parties, while maintaining their individual identities. This could be when a cable company and phone company create a joint venture to offer their customers’ services yet have all their bills on one tab. This makes it easier for companies to offer discounts for bundling services and makes it easy on the customer because they can go to one place rather than several places for different products. References http://www.investopedia.com/terms/h/horizontalmerger.asp Minority business development agency, U.S. Department of Commerce, (n.d.), Retrieved from http://www.mbda.gov/node/1409 N. Jones, 2010. Mergers vs joint ventures: What’s the difference? Retrieved from: http://www.brighthub.com

Saturday, October 26, 2019

Hydrogen Peroxide Features and Uses

Hydrogen Peroxide Features and Uses Research Booklet The occasional table is an unthinkable game plan of the compound components, requested by their nuclear (number of protons), electron setups, and repeating concoction properties. This requesting indicates intermittent patterns, for example, components with comparative conduct in a similar segment. It additionally indicates four rectangular pieces with some roughly comparable compound properties. When all is said in done, inside one line (period) the components are metals on the left, and non-metals on the privilege. Hydrogen peroxide (H2O2) is an exceptionally light blue fluid which seems boring in a weaken arrangement, somewhat more thick than water. It is a powerless corrosive. It has solid oxidizing properties and is in this manner a capable fading operator that is generally utilized for fading paper, yet has additionally discovered use as a disinfectant and as an oxidizer. Hydrogen peroxide as carbamide peroxide is generally utilized for tooth brightening (blanching), both in professionally-and in self-managed items. Hydrogen peroxide (H2O2) is a very much recorded segment of living cells. It assumes essential parts in host resistance and oxidative biosynthetic responses. Whats more there is developing confirmation that at low levels, H2O2 additionally works as a flagging specialist, especially in higher life forms. H2O2 has progressively been an essential cell flagging operator in its own particular right, fit for tweaking both contractile and development advancing pathways with additional sweeping impacts. Because of the gathering of hydrogen peroxide in the skin of patients with the depigmentation issue vitiligo, the human epidermis cant have the ordinary limit with regards to autocrine union, transport and debasement of acetylcholine and the muscarinic (m1-m5) and nicotinic flag transduction in keratinocytes and melanocytes. Gathering proof proposes that hydrogen peroxide (H(2)O(2)) assumes a critical part in growth advancement. Trial information have demonstrated that growth cells deliver high measures of H(2)O(2). The rate of a response can be expanded by including a reasonable impetus. An impetus is a substance which changes the rate of response yet is unaltered toward the finish of the response. Just a little measure of impetus is expected to build the rate of response between a lot of reactants. An impetus is to a specific response: Different impetuses catalyse diverse responses Not all responses have reasonable impetuses The table outlines some basic impetuses utilized as a part of industry and the responses they catalyse. The impact hypothesis clarifies that gas-stage substance responses happen when particles slam into adequate active vitality. The impact hypothesis depends on the Kinetic hypothesis of gasses; accordingly, just managing gas-stage compound responses are managed. Perfect gas suspicions are connected. Moreover, we additionally are expecting: All atoms are going through space in a straight line. All atoms are unbending circles. The responses concerned are between just two atoms. The atoms need to impact. Eventually, the impact hypothesis of gasses gives the rate steady for bimolecular gas-stage responses; it is equivalent to the rate of effective crashes. The rate of effective impacts is corresponding to the part of fruitful crashes duplicated by the general impact recurrence. Substance energy is the investigation of the rates of synthetic responses or how quick responses happen. The essential prerequisite for a response to happen is that the reactant particles (iotas or atoms) must impact and communicate with each other somehow. This is the focal thought of the crash show, which is utilized to clarify many the perceptions made about synthetic energy. Crash hypothesis expresses that the rate of a concoction response is corresponding to the quantity of impacts between reactant atoms. The more regularly reactant atoms impact, the all the more frequently they respond with each other,  quicker the response rate. In all actuality, just a little portion of the crashes are powerful impacts. Compelling impacts are those that outcome in a compound response. Keeping in mind the end goal to create a compelling crash, reactant particles must have some base measure of vitality. This vitality, used to start the response, is known as the initiation vitality. For each specimen of reactant particles there will be some that have this measure of vitality. The bigger the specimen,  the more prominent the quantity of powerful impacts, and the speedier the rate of response. The quantity of particles having enough vitality is subject to the temperature of the reactants. On the off chance that reactant particles dont have the required enactment vitality when they impact, they bob off each other without responding. Some substance responses likewise require that the reactant particles be in a specific introduction to deliver a viable crash. Unless the reactant particles have this introduction when they impact, the crash wont be a compelling one. The response of ozone with nitrogen monoxide is a case of how introduction can be imperative. In 1913, Neils Bohr, an understudy of Rutherfords, produced another model of the iota. He suggested that electrons are masterminded in concentric roundabout circles around the core. This model is designed on the nearby planetary group and is known as the planetary model. The Bohr model can be compressed by the accompanying four standards: Electrons possess just certain circles around the core. Those circles are steady and are called stationary circles. Each circle has a vitality related with it. The circle closest the core has a vitality of E1, the following circle E2, and so forth. Vitality is consumed when an electron bounced from a lower circle to a higher one and vitality is radiated when an electron tumbles from a higher circle to a lower circle. The vitality and recurrence of light radiated or consumed can be figured by utilizing the distinction between the two orbital energies. In 1926 Erwin Schrà ¶dinger, an Austrian physicist, took the Bohr molecule display above and beyond. Schrà ¶dinger utilized scientific conditions to portray the probability of finding an electron in a specific position. This nuclear model is known as the quantum mechanical model of the molecule. Not at all like the Bohr display, the quantum mechanical model does not characterize the correct way of an electron, but instead, predicts the chances of the area of the electron. This model can be depicted as a core encompassed by an electron cloud. Where the cloud is most thick, the likelihood of finding the electron is most noteworthy, and then again, the electron is more averse to be in a less thick territory of the cloud. Hence, this model presented the idea of sub-vitality levels. Until 1932, the molecule was accepted to be made out of a decidedly charged core encompassed by contrarily charged electrons. In 1932, James Chadwick shelled beryllium iotas with alpha particles. An obscure radiation was delivered. Chadwick translated this radiation as being made out of particles with an impartial electrical charge and the rough mass of a proton. This molecule got to be distinctly known as the neutron. With the revelation of the neutron, a satisfactory model of the iota got to be distinctly accessible to scientists. Since 1932, through proceeded with experimentation, numerous extra particles have been found in the molecule. Likewise, new components have been made by besieging existing cores with different subatomic particles. The nuclear hypothesis has been further upgraded by the idea that protons and neutrons are made of much littler units called quarks. The quarks themselves are thus made of vibrating strings of vitality. The hypothesis of the creation of the iota keeps on being a continuous and energizing experience. Science tubes are accessible in a large number of lengths and widths, normally from 10 to 20 mm wide and 50 to 200 mm long. The top regularly includes a flared lip to help spilling out the substance. A science test tube normally has a level base, a round base, or a funnel shaped base. Some test tubes are made to acknowledge a ground glass plug or a screw top. They are frequently furnished with a little ground glass or white coating range close to the top for naming with a pencil.

Thursday, October 24, 2019

One Flew Over The Cuckoos Nest :: essays research papers

"Ting. Tingle, tingle, tremble toes, she’s a good fisherman, catches hens, puts ‘em inna pens†¦wire blier, limber lock, three geese inna flock†¦one flew east, one flew west, on flew over the cuckoo’s nest†¦O-U-T spells out†¦goose swoops down and plucks you out."The book "One Flew Over the Cuckoo’s Nest" is about a man, Randle Patrick Mc Murphy who is a rough-and-tumble, fun-loving guy who comes into the mental ward in Oregon and challenges the authoritarian nurse, Ms. Ratched. As the struggle between them goes on, Mc Murphy starts to show the other men of the ward how to loosen up and that they do not have to always listen to the nurse. Eventually, Mc Murphy is defeated when Ms. Ratched makes him get a lobotomy. When you first pick up the book, you will first notice that the story is told by one of the men who live in the ward. This is Chief Bromden; a half-Indian who is one of the long time committed men. In my eyes, the Bromden is a key character in the whole book. The Chief, in reality, is 6 foot 7 inches tall, but in his mind he sees himself as a man only two or three feet tall. This is because he has received over 200 electro-shock treatments and has been physiologically beaten to think that he is an inferior being to all others but he is not alone. All of the patients in the ward have had this done to them, some more than others. Another thing that sets the Chief apart is the fact that he has led everyone to think he is deaf and mute. This has enabled him to hear some of the secrets of the ward because everyone thought it was safe to talk around him. The Chief has also been in the army and in WWII. He claims to hear and see machinery in the walls of the ward that track and monitor all action that goes on in and around the hospital. With his experiences in war and with what he has gone through in the ward, he often loses himself in a "fog". He creates this "fog" in his mind so that he can numb the reality of where he is. Because of how he acts when in this fog, he has remained distant from all other patients in the ward. At least he was until he met McMurphy.

Wednesday, October 23, 2019

Designing a Personal Music Player Essay

The problem is that I have to design and make a model personal music player that will fit ergonomically into the palm of someone’s hand and fit into a pocket. I am going to design a micro-disc player that is modern and Practical and easy to use. Materials Wood Plastic Metal Glass Manufacture Glue Saw Sand paper Wet and dry paper Weight Light Heavy Storage Where will it go? What will it be stored in? Style / Aesthetics Old fashioned Futuristic Modern Art deco Cost How much will it cost to make? Ergonomics Average sizes Carrying out investigation After completing my analysis it is easy to see what areas I need to research. The first thing I need to find out about is materials. I need to research materials because it is very important that I choose the right materials to make my product. E.g. wood, metal, plastic, glass Below are a list of other areas that I must research before I can write my specification: Existing products (products that are already released on the market) Ergonomics Fittings at the moment I am unsure of what style my product is going to be, here are some of the styles: Futuristic Old fashioned Art deco Modern Analysis Materials – the materials I am going to use to construct my Micro-Disc player must be strong, light and must also look good. The materials I could consider using are: Wood, metal, plastic and glass. Ergonomics – ergonomics is the study and application of the average sizes of human beings in relation to designs. I must think about when designing my product the size of an average humans hand size. Firstly the size of people and secondly the size of my product in comparison to the average size of people. Weight – weight is an important factor I must think about when designing my product Style – I must think about and research lots of different styles, for instance: Art deco, futuristic, old fashioned, modern and many others? Manufacture – I must think about how I am going to make my product – I must remember to write myself a manufactured plan or a flow chart of how I am going to make my product. Storage – I must consider where my product will go. Researching Materials Metals: mild steel – this metal is the most common ferrous metal. it is grey in colour and is a very soft metal. Aluminium – this metal is soft and also light. If mixed with metals as an alloy it becomes strong and easy to use. Woods: hard wood -this wood is harder and generally more durable than soft woods, there are many different colours. Hard wood is normally used for high quality furniture e.g. mahogany. Hard woods are usually very expensive. Soft woods – soft woods are easy to cut, but less durable than hard woods. soft woods are lighter shades of colour and are cheaper than hard woods. soft woods are used alot in the construction industry in roofs, window frames e.g. pine MiniDiscs where created in 1992 by the Sony Corporation to be a cheap, portable, editable, digital recording format that has â€Å"near† CD quality recording. Since then MiniDiscs have taken a slow start. Because everyone had just gotten settled in with their new CD equipment, they did not want to fork out more money for something that seemed like the same thing. Now people are starting to see the real advantage of MDs, and its starting to get a little more popular. In Japan especially, prices are going down and production is going up. I heard that in Japan, the low-end decks are around $150, and discs get down to $1.50, that’s as cheap as a nice tape deck, and hi-bias tape. If more people start buying MD equipment in the US, we could reach those prices. Today, MDs in the US are kind of underground. There are a lot of people that have not heard of them yet, and not a lot of advertising. But more and more I see prices going down, and more people that know about them. Wel l enough of the boring stuff, here are some advantages and disadvantages. advantages! The sound quality is great. I have never been able to tell a difference between MD’s and a CD or DAT. MiniDiscs have an advantage to CD-Rs in that after you record something on them, you can erase the whole disc, erase one track, you can move around tracks, and put in track marks, you can even label the disc and each track. Some formats, like DAT, can do some of these things, but MDs still have the disc based media advantages. MiniDiscs are smaller. The Discs are 7cm x 7cm, and the portable recorders can be smaller than cassette walkmans. The discs are encased in a plastic shell, much like floppy discs, so you don’t have to worry about them getting scratched. Its cheap. Infact I just saw a deck for $199 at Circuit City, where the cd recorders were $499. And if you look, you can find discs for $2.50 to $3.00. There just cool. Just look at the equipment, who wouldn’t want to have this stuff. And, as of all digital formats, you can make a digital copy from any digital source through coaxial or optical connections. Of course that not all the advantages, just some of my favorite. disadvantages? MiniDiscs use compression to cut out inaudible parts of the signal, so it can fit on that little disc. Although studies show that no one can tell the difference, some people want all of there precious signal. It’s hard to find equipment and pre-recorded MDs. I live in Jefferson City, Mo which is a pretty small town, so I have to go to the Big Cities to get stuff. Also, since MiniDiscs aren’t that big in the US yet, not many pre-recorded MDs are manufactured. Those are the only disadvantages I can think of, and the first one doesn’t really even matter. Let me tell you a little more about that compression. compression: MD’s use a method of compression called ATRAC (Adaptive Transform Acoustic Coding), which only records the information audible to the human ear. It compresses the signal to One-fifth of its original size. This compression method is very similar to MPEG encoding, which is used for Mp3’s. As I said before, people have compared MDs, CDs, and DAT, and not been able to tell any difference. I bet your asking yourself, â€Å"but how does it record†? Well, I’m about to tell you. recording: MDs use a special Magento-Optical method that magnetizes regions of the discs 60 millionth of a cm apart to a North or South pole. When the laser runs across these regions, it can tell whether its N or S and starts to construct the data stream. conclusion So, all in all, MiniDiscs are a way to get CD quality recording on a compact, inexpensive, media. I love every part about MiniDiscs, and would definitely recommend them to anyone interested in Hi-Fi audio in general. Sleek, stylish, and silver! Not only does Sony’s MZ-E909 look great on the go, but its rugged magnesium body weighs in at an eminently portable 1.75 ounces. In addition to portability and chic styling, you also get track navigation and playback features cool enough to satisfy even diehard MiniDisc fans. Sony’s â€Å"Easy Skip† group/folder function gives you simple navigation through groups of tracks – especially handy if you’ve used LP4 mode on a separate recorder to fit up to 5 hours’ worth of music on a single 80-minute MD. The backlit LCD on the stick-style remote delivers nearly effortless control, even in the dark. Two digital sound presets let you adjust the bass and treble, then save your preferred settings. And Personal Disc Memory remembers those settings, along with your other listening preferences, for up to 20 discs! But there are also the tried-and-true Sony MD features you love, like MDLP(tm) playback and G-Protection(tm) for a virtually skip-free listening experience. Not to mention an amazing 145 hours maximum playback time with the supplied rechargeable plus one optional â€Å"AA† battery! You even get a handy charging stand, so you can recharge the battery without taking it out of the unit. The MZ-S1 takes MiniDisc durability to the next level! It combines the second generation of Sony’s rugged Sports styling with direct digital dubbing of your favorite PC audio to MD at up to 32 times faster than real-time. Plus, you get handy software for your PC: OpenMG(tm) Jukebox for music management, and Simple Burner QuickRip(tm), which allows you to dub CD tracks directly to MD without saving files on your computer’s hard drive. Making MD mixes of your favorite tunes is easy and quicker than ever! Taking those mixes with you while you work out is ultra-convenient, too. You get easy one-hand operation thanks to a clever thumb-control key on the grip. The included reflective hand strap and backlit LCD are perfect for nighttime jogs. The durable plastic body incorporates rubber gaskets and waterproof seals to help keep out moisture and dirt. And you’ve got G-Protection(tm) for smooth playback no matter how strenuous your workout. The MZ-S1 can also make great-sounding recordings from a CD player, radio, cassette player, and other sources (analog and optical cables available separately). MDLP(tm) record mode lets you store over 5 hours of music using a single 80-minute blank MD. And one optional â€Å"AA† battery can power the MZ-S1 for up to 54 hours! High-speed, drag-and-drop transfer of PC audio. No, it’s not an MP3 player – it’s Sony’s revolutionary new Net MD Walkman! Its advanced USB connection gives you direct digital dubbing of MP3s or ripped CD tracks from your PC to MiniDisc at speeds of up to 32X – that’s 80 minutes of music in as little as three minutes! Plus, you get handy software for your PC: OpenMG(tm) Jukebox for music management, and Simple Burner QuickRip(tm), which allows you to dub CD tracks directly to MD without saving files on your computer’s hard drive. But the pocket-sized MZ-N505 can do more than just record from your PC. It can also make great-sounding recordings from a CD player, radio, cassette player, and other sources (analog and optical cables available separately). MDLP(tm) record mode lets you store up to 5 hours of music using a single 80-minute blank MD – perfect for taking lots of tunes on the go! And, since it’s MiniDisc, you get easy recording, editing, and titling with discs that are fully rewritable, nearly indestructible, and ultra-affordable. Sony’s G-Protection(tm) skip recovery system makes your MD listening experience a smooth one. And an optional â€Å"AA† battery can power the MZ-N505 for up to 56 hours!

Tuesday, October 22, 2019

Texas Proposition 12 essays

Texas Proposition 12 essays Bill HJR 3 from the 78th regular session states proposing a constitutional amendment concerning civil lawsuits against doctors and health care providers, and other actions, authorizing the legislature to determine limitations on Bill HJR 3, also known as proposition 12 on the September 2003 ballot was an issue with great intensity on both sides of the spectrum. The premise of the bill was to limit non-economic damages from malpractice and other health care related issues to $250,000. Non-economic damages are also referred to as punitive damages, which at times have seen judgments upwards of ten million dollars. This poses serious problems for physicians attempting to practice medicine in Texas. With lottery sized rewards being thrown out left and right, trial lawyers feel that they can afford to take a shot at many cases, and hope one scores the jackpot. Consequently, malpractice insurance for doctors in this state have risen to phenomenal highs, and have forced doctors to literally abandon certain services, higher risk cases that leave patients with no other alternative, or even abandon their whole practice all together. Physicians have also limited the Medicaid and Medicare that they take, and their acceptance of complicated problems. If things continue like this, then many patients will have to seek care in distant cities. Proposition 12 is important because it instills lost confidence that physicians once had. It allows them to focus on their practice and continue to see patients with all sorts of issues, from minor to major complications without worrying about the severe repercussions of a misjudgment. After all, physicians are here to better ones well-being and ensure that they are in optimal health, despite what the trial lawyers try to spoon feed the public. Because proposition 12 created such a fervor, it produced extremists for and against the issue. Furthermore, the notio ...